Best Air Compressor Hose Clamp
Deal Score0
Deal Score0
Best results for air compressor hose clamp
LUMITECO 1/4" Lock On All Metal Air Chuck,Mini Air Compressor Portable Tire Inflator Tire Chuck, Hose End with Barb Connector for Hose Repair Inflate Chuck-2Pack
$8.42
$12.38
Last update was on: May 18, 2024 3:08 pm
- 90 degree lock-on all metal construction tire inflator chuck for portable tire inflator, for bike,motorcycle,car
- 1/4" ID Hose Barb end makes it the perfect choice for hose repair
- open flow with a lock-on clamp make it easy for hands free tire inflation
- 2 all metal construction air chuck end,1 free worm gear hose clamp
- Buy with confidence,100% satisfaction guarantee,1 year warranty.Use under 200psi,heavy truck/vehicle forbidden.
TIREWELL 12V Tire Inflator-Heavy Duty Double Cylinders Direct Drive Metal Pump 150PSI, Compressor with Battery Clamp and 5M Extension Air Hose, SUVs/Trucks/Vans/RVs
$65.99
$95.03
Last update was on: May 18, 2024 3:08 pm
- FAST INFLATION: maximum pressure 150PSI, air flow 2.12CFM@0PSI, inflates standard vehicle tire in 2 minutes (195/65/R15, 0-35psi)
- STABILITY TECHNOLOGY: fuselage with four-rod design, effectively reduce the vibration and noise, rubber feet to make sure the air pump stays where it is placed and does not move around during operation ,make the air compressor more powerful
- DOUBLE CYLINDERS DIRECT DRIVE INFLATION PUMP: In the direct drive of the motor, the two cylinders at the same time compressed air, powerful and fast inflatable, also direct-drive motor makes the drive low rotating speed, high efficiency, compact, quiet and stability, and easy to control
Porter Cable ,N003307SV, PRESSURE SWITCH
Hromee 3 Piece Air Hose Fittings Industrial Ball Swivel 1/4 Inch NPT Male x 1/4 Inch NPT Female & 3/8 Inch ID Hose Barb x 1/4 Inch NPT Male End Fitting with Hose Clamp
$8.99
$11.78
Last update was on: May 18, 2024 3:08 pm
- CONNECTOR TYPE - One piece of 1/4" Male NPT plug x 1/4" Female NPT coupler, One piece of 1/4" NPT Male End x 3/8" ID hose barb, One piece of 3/8” hose clamp. These plug and coupler are interchangeable with the automotive standard series plugs produced by other manufacturers.
- BALL SWIVEL CONNECTOR - Ball swivel fittings are used between the tool and air hose to eliminate kinking and twisting. Ball swivels provide a more natural range of motion than the "traditional" air tool swivel fitting. In addition to providing a greater bend angle and flow capacity, this fittings will increase tool maneuverability and production capacity, minimize user fatigue, extend the life of the hose and minimize cost.
LUMITECO Locking Air Chuck with Air Hose and Standard Tire Valve Fine Thread, Air Inflator Hose Adapter for Twist On Convert to Lock On Connection
$7.59
$9.87
Last update was on: May 18, 2024 3:08 pm
- Premium Tire Inflator Hose Adapter, designed for tire inflator hose converting, easily convert tire inflator's twist-on connection to lock-on connection. Screw adapter end onto original inflator hose, press to clamp adapter head onto tire valve, start the inflator for a quickly and none leaking inflation.
- All metal construction air chuck, portable tire inflator chuck adapter, for bike, motorcycle, car air fill. Open flow 90 degree thumb-press air chuck, easy and quick hands-free inflation.
AstroAI Air Chuck, Heavy Duty Closed Flow Lock On Tire Chuck with Clip for Inflator Gauge Compressor Accessories, Yellow
$10.99
$12.75
Last update was on: May 18, 2024 3:08 pm
- 250 PSI RATED BRASS COMPONENTS are designed for heavy-duty use with tire inflators and gauges
- COMPATIBLE WITH SCHRADER valves
- the closed flow design allows air to flow when the internal flow valve is open
- ¼" FEMALE NPT THREADS fit most air inflators
- HEAVY DUTY STRAIGHT TIP makes filling tire hassle-free
- the locking clip keeps the chuck attached to the valve stem during inflation
GODESON Tire Air Chucks with Clip for Tire Inflator and Gauges, Pack of Clip-on and Twist-on Chucks(Pack of 2pcs)
$7.86
$10.06
Last update was on: May 18, 2024 3:08 pm
- 1. HEAVY DUTY BRASS CONSTRUCTION of tire chucks with lock on make the tire air chucks durable and Reliable.
- 2. INTERCHANGEBALE AIR CHUCKS- including Clip-on chuck and Twist-on chuck(thread on) in 1 package. You just choose it for different using. Clip- on chuck is much convenient, while Twist-on chuck can tightly hold the tire valve of bicycles,motorcycles,cars, buses and trucks.
- 3. SMART DESIGN with Large Bore of tire air chuck, Open flow through for heavy duty air chuck, while close flow through for clip-on chuck
EPAuto 2 Pack Closed Flow Straight Lock-On Air Chuck with Clip, for Tire Inflator
$7.87
$10.70
Last update was on: May 18, 2024 3:08 pm
- 1/4-Inch Female NPT. 3/4-Inch Hex
- Heavy-Duty Brass Construction for Strength and Durability
- Clip Locks Onto the Valve While Inflating the Tire
- Closed Air Flow. Air flow is closed as default. Air flows when the tire valve is engaged.
- Closed chuck with Internal Shut-off Valve. Must engage a valve core to flow air.
Senzeal 6mm Open Flow Air Latch Locking Set 2-in-1 1/4"NPT Valve Key Hose Clamp for Inflator Gauge Compressor Accessories
Last update was on: May 18, 2024 3:08 pm
- Metal construction, more durable for long-term use.
- 2 in-1 dual head tire chuck has the function of checking pressure and inflation.
- Easy operation: The tire chuck adopts a push-in chuck design
- no need to thread the chuck onto valve stems, just push the chuck onto the valve for a nice seal.
- Wide use: The 1/ 4 inch NPT threads make this gauge fit for most tire inflators. The air chuck can be applied for trucks, buses, cars, motorcycles, bicycles, etc.
Hromee 20 Pieces 1/4 inch NPT Air Blow Gun and Brass Fittings Kit with Tire Inflation Needles Chuck Air Compressor Connector Couplers and Plugs Hose Splicer Repair Kit with Barb Splicer and Clamps
$16.99
$23.79
Last update was on: May 18, 2024 3:08 pm
- CLEAN-UP TOOLS - The clean-up kit includes a blow gun, a tapered tip and a rubber tip. The blow gun, made of zinc alloy, delivers powerful air flow especially for clearing up messy spots or drying jobs. The rubber tip can protect the delicate surfaces from damage.
- HOSE REPAIR KIT- One brass hose barb with 1/4 in. and 1/4” MNPT fitting to replace damaged hose ends. One brass double barb for splicing hoses to fix damage in the middle of the hose. Stainless-steel high tension hose clamps are easy to use and provide a tight and secure hold for 1/4 inch to 5/8 inch (0-16 mm) hoses.
VIAIR (00016 6′ Portable Compressor Air Extension Hose
$5.60
$7.22
Last update was on: May 18, 2024 3:08 pm
- 8V1 M x 8V1 F Schrader Valve on one end with a twist-on chuck on the other.
- 6ft. Durable air extension hose
- Designed to serve as an extension for smaller portable air compressors for extra reach.
- Can connect to both screw on air chucks and clamp on air chucks.
- One Year Manufacturer's defect warranty through manufacturer with receipt.
Vaper 19345 3/8" Hose Mender
Powermate VX 012-0161CT 3/8-Inch Hose Repair Kit
Hromee 4-Way Straight Air Manifold 5 Ports Aluminum Industrial Pneumatic Air Compressor Quick Connect Socket in Line Type Air Hose Splitter with 4 Couplers and 1/4" Male NPT Plug
$21.99
$27.71
Last update was on: May 18, 2024 3:08 pm
- STRAIGHT MANIFOLD - Milled red aluminium body with nickel plating steel quick connectors for added durability and a leak free fit. The manifold body is made of high corrosion resistant anodized aluminum, making them stronger and 50% lighter than standard fittings.
- COUPLER AND PLUG - 1/4" I/M style coupler and plug are made of nickle plated steel with anodized aluminum sleeves. The steel plug is heat treated to reduce abrasion on critical mating surfaces. Couplers are designed for high corrosion resistance, longer life and smoother operation.
LUMITECO 1/4" Brass tire inflator Lock on air Chuck,Mini air Compressor Portable tire inflator tire Chuck Hose end with Barb Connector for Hose repair-2Pack
$7.99
$11.43
Last update was on: May 18, 2024 3:08 pm
- Heavy-duty brass construction allows for strength and durability.
- 1/4" ID Hose Barb end makes it the perfect choice for hose repairs
- open flow with a lock-on clamp make it easy for hands free tire inflation
- 2 air chuck end ,1 free worm gear hose clamp
- Buy with confidence,100% satisfaction guarantee,1 year warranty
Slime 20332 Inflator Hose Adapter
$6.73
$9.09
Last update was on: May 18, 2024 3:08 pm
- Convert your inflator from a twist-on connection to a press-on connection
- Equipped with an easy snap-on connector
- Simply twist bottom of adapter onto inflator hose
- push adapter head onto valve
- and press lever down to attach
- Quickly connect to your tire for a speedy inflation
AstroAI ATG250 Digital Tire Inflator with Pressure Gauge, 250 PSI Air Chuck and Compressor Accessories Heavy Duty with Rubber Hose and Quick Connect Coupler for 0.1 Display Resolution
$26.99
$36.44
Last update was on: May 18, 2024 3:08 pm
- Check out our VIDEO on the left side and take a quick tour of AstroAI tire inflator gauge. ADVANCED ACCURACY: Professionally calibrated to always return a reading within 1% of the exact pressure of your tire and 0. 1 display resolution. No more guessing! Accurately measures a range from 0-250 PSI (0-17. 2 Bar
- 0-1724 Kpa
- 0-17. 5 kg/cm²)
- ALL-IN-ONE: The LED backlit screen features measurements in PSI, KPA, Bar, and Kg/cm²
Flexzilla Pro Air Hose, 3/8 in. x 35 ft, Heavy Duty, Lightweight, Hybrid, ZillaGreen – HFZP3835YW2
$37.31
$53.35
Last update was on: May 18, 2024 3:08 pm
- EXTREMELY FLEXIBLE - All weather flexibility (-40 Degree to 150 Degree F Ambient)
- EXTREMELY DURABLE - Abrasion resistant outer cover and crush resistant aircraft aluminum fittings with bend restrictor
- WON'T KINK UNDER PRESSURE - Hybrid polymer coils easily and lays flat with zero memory
- 300 POUNDS PER SQUARE INCH - Maximum working pressure
- FIELD REPAIRABLE - Reusable fittings can be repaired on job site in a few simple steps