Best craftsman turn tight problems
Deal Score0
Deal Score0
Best results for craftsman turn tight problems
GearWrench 114PC 82812 Ratcheting Tap and Die Drive Tool Set SAE/Metric
3M WorkTunes Connect Hearing Protector with Bluetooth Technology
$47.75
$64.94
Last update was on: May 4, 2024 4:54 am
- Noise Reduction Rating (NRR) of 24 dB
- Bluetooth Technology lets you seamlessly stream entertainment from your mobile phone and any other Bluetooth enabled device
- High-fidelity speakers provide premium sound quality.Compatible with non-Bluetooth devices via 3.5m audio cable
- Integrated microphone lets you make and take phone calls without removing the ear protection
- Cord and antenna-free design lets you move easily on the job
NoCry 20V Cordless Impact Wrench Kit – 300 ft-lb (400 N.m) Torque, 2700 Max IPM, 2200 Max RPM, 1/2 inch Detent Anvil, Belt Clip; 4.0 Ah Battery, Fast Charger & Carrying Case Included
$129.99
$171.59
Last update was on: May 4, 2024 4:54 am
- This cordless impact wrench will effortlessly loosen any lug nut, bolt or large screw with 300 ft-lb (400 N.m) of torque, and give you 260 ft-lb (350 N.m) to tighten them. Along with the tool itself, you will get one 20volt battery, a belt clip, fast charger, and a carrying case.
- Work quicker, longer and with fewer stops thanks to the rechargeable 20V 4.0 Ah lithium-ion battery - fully charged in only 2 hours with the NoCry fast charger (both compatible with NoCry 20V power tools only).
24pc IN/MM TIGHTSPOT Ratchet Wrench MASTER SET – Inch & Metric With Quick Access Wrench Organizer – Our standard in combination wrench sets from gear to tip
$89.97
$105.26
Last update was on: May 4, 2024 4:54 am
- 24 PIECE MASTER SET SIZES: 1/4", 9/32", 5/16", 11/32", 3/8", 7/16", 1/2", 9/16", 5/8", 11/16", 3/4", 7/8" & 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm,16mm, 17mm, 18mm, 19mm
- QUICK ACCESS WRENCH ORGANIZER: Avoid messy rollup bags just to get 1 wrench out! Not to mention the painstaking time it takes to organize, and perfectly roll up. Our wrench organizer almost magically cuts this time down to seconds.
Cordless Electric Ratchet Wrench Set, AOBEN 3/8" 12V Power Ratchet Tool Kit With 2 Packs 2000mAh Lithium-Ion Battery And Charger
$75.99
$90.43
Last update was on: May 4, 2024 4:54 am
- POWERFUL TORQUE - AOBEN electric ratchet wrench offers 12 Volt Max motor and plenty torque at 35ft-lbs to remove or install bolts (or nuts). Includes 2 battery, 1 charger and 8 bolts.
- SUPERIOR FASTENING SPEED- Ratchet wrench set superior fastening speed: produces 280rpm with a variable-speed trigger for excellent control.
- LED LIGHTING - LED light on the front of the unit lighting the workplace for you in the dark. Lights on the side of the unit will let you know how much power you have left.
Workpro 408-piece Mechanics Tool Set
$199.99
$297.99
Last update was on: May 4, 2024 4:54 am
- Ratchet handles are ergonomically designed and have an easy-to-use, thumb-operated reverse-switch mechanism, quick released operation
- Chrome vanadium forged body for torque, strength and durability
- Full polish chrome finish for anti-corrosion protection
- Most daily use tools, includes hammer, level, tape measure, hex key, sockets, pliers, screw driver handle and bits
- Quality hand tools with professional features meeting ANSI standards
GearWrench 81230P 4 Pc. 1/4", 3/8" 1/2" Drive 120XP Full Polish Ratchet Set
$103.04
$147.35
Last update was on: May 4, 2024 4:54 am
- Access - Adjustable flex head has six positions and gives additional clearance where needed for increased access
- Speed - 120 positions give a 3Degree ratcheting arc, so you can turn a fastener in tighter confines
- Speed - Double-Stacked pawls deliver 180% of ASME torque performance
- This set includes all 3 drives sizes
- 1/4", 3/8" & 1/2" in a full polish finish. In addition it also includes a 3/8" Drive full polish Stubby ratchet
TEKTON 1/4-Inch Drive 6-Point Socket & Ratchet Set, Inch/Metric, 5/32-Inch – 9/16-Inch, 4 mm – 14 mm, 55-Piece (Case) | SKT05301
$54.89
$70.26
Last update was on: May 4, 2024 4:54 am
- Complete set has every size from 5/32 to 9/16 inch and 4 to 14 mm in both deep and standard lengths. Sockets included in deep and standard: 5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in. And 4, 4. 5, 5, 5. 5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm
- also included: 1/4 in. Drive 90-Tooth quick-release ratchet: 6 in.
- 1/4 in. Drive Spinner handle: 6 in.
- 1/4 in. Drive extension bars: 3, 6 in.
Kreg KMS7102 Table Saw Precision Miter Gauge System
Last update was on: May 4, 2024 4:54 am
- Factory Calibration. Guaranteed out of the box to .003 accuracy of 6-inches
- Gauge head is CNC machine perfectly square to the bar and table ( no stampings)
- Vernier scale allows fast, 1/10th-degree angle adjustments. Our extremely straight 24 inch (610mm) anodized-aluminum bar is 3/8 inch(9.5mm) thick by 3/4 inch(19mm) wide and features five bar adjusters that you can use to eliminate “play” in the miter slot with the turn of a screwdriver
Best Value 24-Piece Master Combination Wrench Set with Roll-up Storage Pouch | SAE 1/4” to 1” & Metric 8mm to 24mm
$29.99
$35.99
Last update was on: May 4, 2024 4:54 am
- PREMIUM MATERIAL: constructed from high strength drop forged and heat treated chrome vanadium steel
- DURABLE FINISH: corrosion and rust resistant chrome plating finish for durability and extended tool life
- EASY TO USE: precisely manufactured 12-point offset box end and 15-degree angled open end for easy access to fasteners in tight spaces
- MORE TORQUE: raised panel wrench design provides more leverage and gripping power
GEARWRENCH 9416 16 Piece Metric Master Ratcheting Wrench Set
Last update was on: May 4, 2024 4:54 am
- 72 tooth ratcheting box end needs a minimal 5° to move fasteners vs. 30° for standard wrenches
- Off-corner loading design on box end provides better grip and reduces fastener rounding
- Pass-thru technology works down any length of threaded rod and long bolts
- Thin head and beam provide greater access in confined work areas
- Size conveniently stamped on both ends of the beam for quick identification
- Manufactured from alloy steel for better strength and longer tool life
ARES 70000 | 3" Impact Grade Socket Adapter/Extension Set | Turns Power Drill Into High Speed Nut Driver | 1/4", 3/8", and 1/2" Drive
$7.99
$9.35
Last update was on: May 4, 2024 4:54 am
- SPECIFICATIONS: This ARES Impact Grade Socket Adapter/Extension Set comes with three 1/4 inch hex shank, 3-inch-long socket adapters so you can turn any power drill into a power nut driver with the extra reach you need. The sizes included are 1/4 inch, 3/8 inch, and 1/2 inch.
- DESIGN CONSIDERATIONS: Each adapter is made of heat-treated chrome vanadium steel and coated in Manganese Phosphate for industrial or mechanical use and meets or exceeds ANSI/ASME standards. The spring loaded detent ball ensures sockets are secured to the adapters.
TEKTON 5866 12-Inch Oil Filter Pliers
Sun Joe SPX3001 2030 PSI 1.76 GPM 14.5 AMP Electric Pressure Washer with Hose Reel, Green
$168.66
$244.56
Last update was on: May 4, 2024 4:54 am
- 5 Quick-Connect spray tips (0º, 15º, 25º, 40º and soap) tackle light, medium and heavy duty cleaning tasks
- Powerful 14.5-amp/1800-Watt motor generates up to 2030 PSI/1.76 GPM for maximum cleaning power
- Onboard reel keeps 20 ft (6m) high pressure hose organized for quick and easy clean-up and storage
- TSS (Total Stop System) - Automatically shuts off the pump when trigger is not engaged to save energy and prolong pump life
TACKLIFE Master Hex Bit Socket Set, S2 Steel | Metric and SAE | 35-Piece Set – HBS1B
$34.97
$49.66
Last update was on: May 4, 2024 4:54 am
- ▲【Premium Material】 With superior hardness and toughness, S2 alloy steel hex bits can effectively reducing wear and ensuring longevity
- Sand blasting finish protects bits from rust and corrosion
- ▲【Powerful Torque】Heat treated Cr-V sockets provide superior torque for greater turning power
- Matte finished sockets guarantee excellent durability and waterproof anti-rust capability
- ▲【Precise Sizes】 CNC machining bits ensure accurate sizes
eTORK (C3250) 1/2-Inch Drive"Click Style" Torque Wrench (50-250 ft.-lb./70-340 N.m)
Last update was on: May 4, 2024 4:54 am
- ✔ Lifetime Personal Use Guarantee ✔
- Wrench releases and/or clicks when preset torque value is reached
- Meets the requirements of American National Standard ASME B107.300-2010
- Accurate to +/- 3% in clockwise direction compared to most competitors’ +/- 4%
- Operates and measures torque in both clockwise and counterclockwise direction compared to most competitors’ clockwise direction only
TEKTON 24330 3/8-Inch Drive Click Torque Wrench (10-80 ft.-lb./13.6-108.5 Nm)
$38.00
$43.70
Last update was on: May 4, 2024 4:54 am
- Wrench emits that can be heard and felt when the preset value is reached
- High-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet head drives in both directions and measures torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- Ships pre-calibrated to +/- 4% accuracy and ready to use
Neiko 10288A Master Hex Bit Socket Set, S2 Steel | 32-Piece Set | SAE and Metric
$39.95
$45.14
Last update was on: May 4, 2024 4:54 am
- DURABILITY: bits made of premium S2 alloy steel for superior hardness that reduce wear-outs and insure longevity
- TORQUE STRENGTH: high strength chrome vanadium steel sockets provide superior torque for greater turning power with mirror chrome finish for corrosion resistance
- PRECISION BITS: precisely and automatically machined bit tips to ensure accurate size, chamfered bit ends insert smoothly into fasteners and protect both bits and fasteners from damaged edges