homeassistpoint 
Best results for magnetic drill chuck adapter
HEAVY DUTY 5/8" (16mm) Magnetic Drill Chuck with 3/4" Weldon Shank Adapter
$54.00
$68.04
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- 5/8" Heavy Duty Chuck for Magnetic Drill Press
- 3/4" Weldon Shank adapter (The jacobs taper end press fits into the chuck, opposite end is 3/4" weldon shank)
- Please confirm your drill is compatible with a 3/4" Weldon Shank
- Comes With Chuck Key and adapter
THREADED HD Mag Drill Chuck – 5/8" For Magnetic Drill – Heavy Duty
Bosch ITBHQC201 2 1/4", Impact Tough Quick Change Bit Holder
$5.99
$7.19
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- 10x life over standard impact bits
- Xtended torsion zone helps to absorb high-torque of new impact drivers
- Advanced design provides secure fit
- Heat-treated manufacturing for increased durability
- High-visibility sleeve with laser-etched markings for user convenience
Hougen HMD904 115-Volt Magnetic Drill w/coolant bottle plus 1/2" drill chuck, adapter and 12002 rotabroach cutter kit
$1,175.00
$1,668.50
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- The mag drill of choice for fabrication. Lightweight, compact, powerful, & versatile. Now better than ever completely redesigned with more features.
- Large 7/16"-1-1/2" dia. / 2" D.O.C. Capacity and a 450 RPM motor. New - pilot light for low light or no light conditions, New - two stage magnet 30% power increase when motor is turned on.
- New - slot drive arbor for more accuracy and quicker change out of accessories, New - housing - stronger stiffer, more ergonomic, positive slug ejection.
1/4 Inch 5-13mm Hex Nut Driver Set Metric Socket Impact Drill Bits+ 6.35mm Hex Shank Magnetic Extension Chuck Adapter Quick Release Bar+ Socket Adapter for Quicker Change Chuck and Electric Hand Drill
$12.79
$17.52
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- 1 piece 1/4 Inch Hex shank for extending all kinds of screwdriver bits, screwdriver head conversion uses.Built-in magnetic (Only the bottom of the hole part), fast quick release will greatly improve work efficiency.
- 4 Piece Socket Adapter Set, Includes 1/4", 3/8" and 1/2" engineered for use with impact drivers.
- 9 piece Metric Power Nut Driver Bits (without magnetic): 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm.Universal 1/4'' hex shanks fit quick-change and lock firmly in standard chucks, suitable for any drill, driver and screw gun.
Hougen HMD904S 115-Volt Swivel Base Magnetic Drill w/coolant bottle plus 1/2" drill chuck, adapter and 12002 Rotabroach Cutter kit
$1,273.02
$1,489.43
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- ✔️The mag drill of choice for fabrication. Lightweight, compact, powerful, & versatile. Now better than ever completely redesigned with more features.
- ✔️Large 7/16"-1-1/2" dia. / 2" D.O.C. Capacity and a 450 RPM motor. New - pilot light for low light or no light conditions, New - two stage magnet 30% power increase when motor is turned on
- ✔️Swivel Base adds even greater versatility: Precisely line up your pilot with the holes center location, One stroke lock and unlock handle, Great for horizontal, overhead, tight areas, and getting out over another piece of steel, New - slot drive arbor for more accuracy and quicker change out of accessories
ARES 70790 | Right Angle Driver | Max Torque of 504 in/lbs | For Use with 18 Volt or 2,000 RPM Drills | Features Quick Release | Easily Swap Out 1/4-inch Drive Bits
$38.92
$50.21
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- ITEM SPECIFICATIONS: The ARES Right Angle Driver is can be used with 1/4-inch drive bits, is made for impact-grade applications, and works with drills up to 18 Volts or 2,000 RPM.
- DESIGN CONSIDERATIONS: This right angle driver features a true 90-degree head and can exert maximum torque of 504 in/lbs. Thanks to the quick release function, it's easy to change out bits and move between jobs more quickly while the adjustable support handle adds stability and versatility to this handy driver. The end of the handle also unscrews, so you can store a bit inside for added convenience.
TLEEP 20 Pieces Power Nut Driver Drill Screwdriver Bit Quick Change Screw-Black Chrome Vanadium Steel Metric Socket Wrench Screw 1/4” Driver Hex Set
$13.44
$18.68
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- √ 20 PIECES, 10 DIFFERENT SIZES’ IMPACT DRIVER BIT SET to meet your different needs. 10PCS Power Nut Driver Bits (Standard): 1/2, 7/16, 3/8, 11/32, 5/16, 9/32, 1/4, 7/32, 3/16, 5/32 inch
- 10PCS Power Nut Driver Bits (Metric): 12mm, 11mm, 10mm, 9mm, 8mm, 7mm, 6mm, 5.5mm, 5mm, 4mm. Thumbs up!
- √ VERY WELL MADE AND TOUGH AS NAILS - Extraordinary Technology & Professional & Durability. Made from the forged and hard chrome vanadium steel, the hardness can reach 52±2 HRC
DEWALT DW2235IR 5-Piece IMPACT READY Magnetic Nutsetter Set
Neiko 00244A Impact Socket Adapter & Magnetic Bit Holder, 4Piece Set | 1/4" Hex Shank with 1/4, 3/8, 1/2" Drive | CR-V
$6.99
$10.14
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- Drill to impact-ready socket adapters are compatible with respective-sized sockets, ratchet handles, extension bars, corded and cordless drivers for all your fastener needs
- One 1/4-inch hex shank magnetic bit holder is included for jobs requiring extensions into hard-to-reach spaces
- All chrome vanadium steel pieces are heat treated for superior strength, with black phosphate coating finish to protect against rust and corrosion
Dophee 8Pcs Socket Adapter Impact Hex Shank Drill Bits Power Extension Bar Set 1/4" 3/8" 1/2" Bits
$6.89
$8.06
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- Material: chrome vanadium steel. Chrome vanadium steel suitable for heavy duty impact drivers. Spring loaded ball bearings on each square head securely and locks into sockets to avoid slippage during using.
- This set is perfect for your impact driver or drill, and allows you to replace your ratchet with a power tool. The 1/4" hex shank fits all quick change chucks as well as standard drill chucks.
- Suitable for a screwdriver or electric screwdriver handle tools (hexagonal hole or three-jaw chuck can) drive sleeve and after use can be installed on the size of the original hexagonal polygons converted to square head size, which can be used to install the sleeve is a good accessory to convert.
Socket Bit Hex Shank Adapter Drill Nut Driver Power Extension Bar 3pc Set 1/4" 3/8" 1/2" for Automotive,DYI and Home Repair Tool Kits by Bastex
$7.93
$8.88
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- General Usage: This 3 piece Hex Shank Bit Driver Extension Bar Set is designed to meet a variety of needs. Fits snugly and securely in your drill chuck or hand held driver. Consisting of your most common bit sizes 1/4", 3/8", and 1/3" changing shank sizes. Provides versatility and convenience no matter which tool you chose to use. Great for the DYI,Automotive Repairs,Household Maintenance, and most general repairs. A great tool addition to any tool box set.
Bastex 1/4″ Impact Drive Shank Chuck Quick Connect Adapter for Hex Bit Drill Heads Easy Change Out Decrease Project Times with Fast Bit Changes Key-less Bit Lock Mechanism Pop Up Batch Head Magnetic
$5.95
$7.68
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- GENERAL USAGE: Fast easy quick convenient changing of bits without the need to search for the lock key every time. This 1/4" adapter is designed to provide fast easy efficient changing of bits during any common project or repair. Precisely made for hex shank bits this adapter works great for projects using power drills, impact drills and manual hand held interchangeable screwdrivers with a hex chuck. Aids in the extension of all kinds of screwdriver and fastener bits.
Milescraft 1303 Drive90PLUS – Impact Ready Right Angle Attachment
$17.99
$20.69
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- Impact ready
- New, improved gears with integrated gear support for longer life and durability
- Minimum reach of 1.5”
- Accepts most 1/4” hex Accessories and includes a Phillips driver bit
- Finger grip handle for maximum comfort and control when drilling
TIMESETL 8Pcs Impact Grade Socket Adapter Set 1/4” 3/8” 1/2” Hex Square Nut Driver Adaptor Power Drill Extension Bit
$7.99
$10.31
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- [High Quality] Made of heat-treated hardened chrome Vanadium(CR-V) steel, good abrasion resistance and high hardness, without breaking or rusting, heavy duty impact driver socket adapter set
- [Secured Fit] Spring loaded ball bearing on head, designed to fit securely while providing versatility and convenience no matter which tool you use
- [Shank of Diameter] 1/4” hex shank interface, fast connect, work on quick change drill chuck, standard drill chuck, handheld screwdriver, electric screwdriver, change your hand socket set into a driven socket set
Champion Cutting Tool Corp QX1234 Quick Change Adapter
Bestgle 3 Pcs 1/4 Inch Hex Shank Quick Release Magnetic Screwdriver Bit Holder Extension Chuck Adapter Set for Screws, Nuts and Handheld Driver, 60mm/ 100mm/ 150mm Length
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- Interface has a locking mechanism, built-have magnetic, automatically pop up batch head
- Quick change and release system allows you to quickly install, lock and unlock the bit easily
- 1/4" hex shank (6.35mm), perfect for drill, screwdriver, batch head and other to transfer
- Length: 2"(60mm),4"(100)mm,6"(150mm), Extend all kinds of screwdriver bits, screwdriver head conversion uses
- Note: Only the bottom of the hole part is magnetic, the hex shank is NOT magnetic! Only for single head drill
METAKOO Socket Adapter Drill, Extension Bar Set With Magnetic Bit Holder, 9 Piece Cr-V, Hex Shank, 1/4, 3/8, 1/2 Inch Drive – MSA01H
Amazon.com
Last update was on: July 24, 2024 11:40 pm
- ☘CR-V and black phosphate finish☘
- ▲ DURABILITY: Made of heat treated chrome vanadium steel ( Cr-V ) with a protective black oxide finish, superior strength, anti-corrosion and rust.
- ▲ STABILITY: Spring-loaded detent balls on each square head securely latch onto sockets, preventing them from being dropped, guaranteed stability.
- ▲ WIDE USAGE: Must-have accessory set for power drills and impact drivers. Come with a 1/4" Hex shank magnetic bit holder great for working with hard to reach screws.
